China Zinc Aluminum Magnesium Steel Pipe Manufacturers Suppliers Factory

Zinc Aluminum Magnesium (ZAM) Steel Pipe Manufacturer & Supplier

Next-Generation Zn-Al-Mg Coated ERW Steel Pipes for Solar Racking, Agricultural Greenhouses & Heavy Infrastructure
CXC Steel Tube manufactures high-performance Zinc Aluminum Magnesium (ZAM) coated steel pipes engineered to outlast conventional hot-dip galvanized steel in high-corrosion, saline, and humid environments. Featuring a precision-controlled Zn-6%Al-3%Mg alloy coating, our ERW steel pipes deliver superior barrier protection and revolutionary cut-edge self-healing technology, eliminating the need for post-fabrication anti-corrosion touch-ups.

Core Supply Capabilities:
Coating System: Premium Zn-6%Al-3%Mg alloy (Nominal: 210 g/sqm | Triple-Spot Min: 180 g/sqm)
Corrosion Resistance: 4,000+ Hours Neutral Salt Spray (NSS) without red rust (1,000+ hours at cut-edges)
Governing Standards: ASTM A1046/A1046M, EN 10346, JIS G3323, ASTM A53, EN 10219
Product Range: Round (OD 10–219 mm), Square (10x10–200x200 mm), Rectangular (10x20–150x200 mm)
Downstream Processing: In-house precision cutting, 180-degree bending, punching, end-threading, and grooving
Quality Verification: 100% Heat Traceability, MTC (EN 10204 3.1), 3rd-Party Inspection (SGS/BV/TUV)

Zn-Al-Mg Coated Round Steel Pipe
Outer diameter range:10mm – 219mm. Wall thickness range:0.75mm – 6mm. Length:6m, 9m, 12m or customized according to customer requirements.
Zn-Al-Mg Coated Square Steel Tube
Base material:High-quality carbon structural steel such as Q195, Q235B, and Q355B. Coating type:Zn-Al-Mg alloy coating. Side length range:20×20mm to 200×200mm.
Zn-Al-Mg Coated Rectangular Steel Tube
Cross-sectional dimensions:20×10mm – 400×200mm. Wall thickness range:0.75mm – 12.0mm. Length:6m, 9m, 12m or custom length as per customer requirements.
Mounting Support Tube
Ordinary Ground-Mounted Power Station:80×40×2.5mm Rectangular Tube. Coastal/High-Corrosion Areas:100×50×3.0mm Rectangular Tube. Roof Lightweight Support:40×40×2.0mm Square Tube.
Photovoltaic Ground Pile Pipe
Photovoltaic G round P ile P ipe I ntroduction Photovoltaic ground pile pipes are core foundation support components specifically designed for ground-mounted photovoltaic power stations. They are

Technical Specifications

Parameter	CXC Supply Capability & Standard Options
Product Type	ERW Zinc Aluminum Magnesium (Zn-Al-Mg / ZAM) Coated Steel Pipe
Coating Alloy Composition	Zn-6% Al-3% Mg (Custom ternary alloy formulations available)
Coating Mass (Grammage)	ZM60 to ZM275 (Nominal 210 g/sqm, Triple-Spot Min. 180 g/sqm)
Round Pipe Outer Diameter	OD 10 mm – 219 mm
Square Section Size	10 x 10 mm – 200 x 200 mm
Rectangular Section Size	10 x 20 mm – 150 x 200 mm
Wall Thickness (WT)	0.75 mm – 6.0 mm
Standard Lengths	5.8 m, 6.0 m, 11.8 m, 12.0 m (Custom precision length cutting +/-1 mm)
Base Metal Substrate	Cold-Rolled (CR) or Hot-Rolled (HR) Steel Strip
Substrate Steel Grades	S250GD, S350GD, S450GD, S550GD, Q195, Q235B, Q345B, SPCC
Coating Standards	ASTM A1046 / A1046M, EN 10346 (ZM Coating), JIS G3323
Pipe Standards	ASTM A53, EN 10219, EN 10255, JIS G3444
End Configurations	Plain End, Threaded (NPT/BSPT) with caps, Grooved, Flanged
Secondary Processing	Laser Cutting, Hole Punching, Swaging, Bending, Flattening
Quality Testing	XRF Coating Alloy Analysis, T-Bend Adhesion Test, NSS Salt Spray Test, Hydrostatic Test

Key Advantages

Superior Cut-Edge Self-Healing: When ZAM pipes are cut, drilled, or punched on-site, zinc and magnesium ions migrate across the exposed steel edge to form a dense, protective Simonkolleite film, preventing edge red rust without secondary painting.

3x to 5x Longer Lifespan vs. HDG: In salt-spray and harsh atmospheric testing, ZAM coating provides up to 5 times the corrosion resistance of standard hot-dip galvanized pipes of equivalent coating thickness.

Reduced Total Project Cost: Extended service life and zero requirement for post-fabrication seam spraying or touch-up coating drastically lower installation labor and lifetime maintenance expenses.

Excellent Coating Formability: High coating adhesion allows tight 180-degree bending, swaging, and roll-forming without micro-cracking, flaking, or peeling of the protective layer.

High-Strength Material Substrates

S350GD / S450GD / S550GD

Structural zinc-coated grades with high yield strength (up to 550 MPa), designed specifically for solar tracker torque tubes, purlins, and lightweight structural framing.

Q235B / Q345B

Standard structural steel grades offering optimal weldability and balanced mechanical properties for general construction and infrastructure.

Q195 / SPCC

Low-carbon deep-drawing steel ideal for tight radius bending, swaging, and complex component manufacturing.

Core Industrial Applications

Solar Photovoltaic Structures

Driven piles, solar racking posts, single-axis tracker torque tubes, and framing rails exposed to outdoor weathering for 25+ years.

Agriculture & Livestock Facilities

Greenhouse framing, livestock penning, crop support systems, and ventilation tubes resistant to harsh ammonia environments.

Heavy Infrastructure & Utilities

Highway sound barriers, guardrails, cable tray supports, lighting poles, and railway overhead line gantries.

Industrial & Automotive Components

Scaffolding components, HVAC duct supports, conveyor system frames, and structural automotive chassis tubes.

Direct Technical Comparison

Feature / Performance Metric	CXC ZAM Steel Pipe	Hot-Dip Galvanized (HDG)	Pre-Galvanized Pipe
Metallic Alloy Composition	Zinc + 6% Aluminum + 3% Magnesium	99% Pure Zinc	99% Pure Zinc
Coating Structure	Ternary Eutectic Protective Layer	Pure Zinc / Fe-Zn Alloy Layers	Light Pure Zinc Layer
Cut-Edge Corrosion Control	Self-Healing Protective Film (Automated)	Rapid Edge Rusting (Requires Paint)	Severe Edge Rusting (Unprotected Seam)
Neutral Salt Spray Resistance	4,000+ Hours to Red Rust	500–1,000 Hours to Red Rust	150–300 Hours to Red Rust
Scratch & Wear Resistance	Extremely High (Hard Alloy Surface)	Moderate (Soft Pure Zinc)	Low
Ammonia / Alkali Resistance	Exceptional (Ideal for Livestock & Agriculture)	Poor to Moderate	Poor
Long-Term Service Environment	Coastal, Marine, Chemical, Solar Farm	Industrial, Outdoor Construction	Mild Indoor, Dry Scaffolding

Integrated Quality Assurance & Mill Testing

XRF Spectrometry Analysis

Verifies exact Zn-6Al-3Mg chemical percentage for every steel coil batch.

Multi-Point Coating Weight Measurement

Triple-spot magnetic testing ensures consistent coating distribution across top, bottom, and side walls.

180-Degree T-Bend Adhesion Test

Guarantees zero coating flaking under severe bending and mechanical deformation.

Continuous Salt Spray Validation

Random sample testing in salt fog chambers to ensure compliance with 4,000+ hour corrosion protection benchmarks.

Traceable Documentation

Every order is dispatched with a full EN 10204 3.1 Mill Test Certificate (MTC), detailing chemical heat analysis, mechanical yield/tensile strength, and coating thickness records.

Certificate

p2026071414594220acb.jpg (800×1128)

How to Request a Fast Commercial Quotation

To enable our engineering team to provide an accurate quotation within 12 hours, please include the following technical requirements in your RFQ:

Pipe Type & Shape: Round / Square / Rectangular ZAM Steel Pipe

Dimensions: Outer Diameter (or Section Dimensions) and Wall Thickness (mm)

Steel Substrate Grade: E.g., S350GD, S450GD, Q235B, or equivalent

Coating Mass Requirement

E.g., ZM180, ZM210, or ZM275 (g/sqm)

Length & End Condition

E.g., 6.0 m Plain Ends / Threaded Ends / Grooved Ends

Secondary Fabrication

Precision cutting length, hole punching drawings, or bending requirements

Quantity & Delivery

Total tonnage or total linear meters, along with your Destination Port (FOB / CIF terms)

FAQ

Q: What is ZAM steel pipe, and why is it superior to traditional galvanized pipe?

A: ZAM steel pipe is coated with a ternary alloy of Zinc, 6% Aluminum, and 3% Magnesium. The addition of Aluminum and Magnesium creates a much harder, more corrosion-resistant barrier than pure zinc, delivering up to 5 times longer service life and automated self-healing protection on cut edges.

Q: Can ZAM steel pipe be cut and drilled on-site without rusting?

A: Yes. Unlike standard galvanized pipe, ZAM pipe features a self-healing mechanism. When the pipe is cut or punched, magnesium-rich corrosion products migrate to cover the exposed steel edge, preventing red rust from developing.

Q: What coating standards do CXC ZAM pipes comply with?

A: Our ZAM coated products are manufactured in strict compliance with international metallic coating standards, including ASTM A1046/A1046M, EN 10346 (ZM Coating), and JIS G3323.

Q: Is ZAM steel pipe suitable for solar PV mounting structures?

A: Yes. ZAM pipe is currently the preferred standard for ground-mounted solar project racking and tracker systems worldwide, due to its ability to withstand 25+ years of severe atmospheric and soil exposure without secondary maintenance.

Q: Can CXC provide third-party inspection for wholesale orders?

A: Yes. We regularly coordinate third-party pre-shipment inspections with independent agencies such as SGS, Bureau Veritas (BV), or Intertek to verify coating mass, dimensions, and mechanical properties.

As one of the most professional zinc aluminum magnesium steel pipe manufacturers and suppliers in China, we're featured by quality products and good price. Please rest assured to buy cheap zinc aluminum magnesium steel pipe for sale here from our factory. Customized orders are welcome.

Zn Al Mg Coated Round Steel Pipe, Zn Al Mg Coated Square Steel Tube, Support Structure Pipe